How do I run a reactivation campaign in HighLevel?
By Ben McGary
Drafted with AI, then reviewed and approved by Ben McGary
Verified against HighLevel as of November 20, 2026
- Area
- Follow-up
- Time
- 18 min
- Difficulty
- Working
- Outcome
- more booked appointments
- Updated
- November 20, 2026
Don't have a HighLevel account yet? Set one up and follow this guide in your own account.
Paid link
Before you start
- Admin access to Contacts and Automation in the sub-account
- A registered SMS number, either A2P 10DLC or a verified toll-free number, for texting US contacts
- A tag or field that records who agreed to marketing messages
- A pipeline with a stage for revived leads, such as Re-engaged
- In the new navigation from Labs, Automation shows as Automations
Steps
ContactsFiltersSave as Smart List
Build the reactivation list
Open Contacts and click Filters. Add Last activity older than 90 days, your marketing consent tag or field, DND all turned off, and Opportunity status not Open. Check the count, spot-check 10 contacts by hand, and save the view as a Smart List named Reactivation.
Setting What to enter Last activity Older than 90 daysMatch it to your sales cycle Marketing consent Your consent tag or field is presentText only people who agreed to marketing messages DND all OffContacts with DND on never receive the campaign Opportunity status Not OpenLeaves active deals with their owners You should now see: A saved Smart List named Reactivation with a count you checked by hand
Why this matters: Consent is the line between a reactivation campaign and spam. Carriers filter numbers that draw complaints, and that filtering hits every text the sub-account sends afterward.
AutomationWorkflowsCreate workflow
Start the campaign workflow
Create a workflow from scratch named Reactivation campaign. Click Add new trigger, choose Contact tag, and filter it to the tag reactivation-2026-11. A dated tag keeps this campaign apart from the next one.
Setting What to enter Trigger Contact tag Filter Tag added: reactivation-2026-11Use the same spelling when you tag the list You should now see: A Contact tag trigger filtered to reactivation-2026-11
Why this matters: Tagging the list is the switch that starts the campaign. Building the workflow first means no contact gets the tag before the messages exist.
WorkflowAdd actionDrip
Release contacts in small batches
Add the Drip action under the trigger. Start with a Batch size of 50 and a Drip interval of 1 hour. Contacts already waiting in the Drip keep the settings they entered with, so later changes apply only to contacts who arrive afterward.
Setting What to enter Batch size 50Allowed range is 1 to 10,000 Drip interval 1 hourMinutes 1 to 60, hours 1 to 24, days 1 to 7 You should now see: The Drip action with a preview of batch numbers and projected send times
Why this matters: A slow release spreads replies across the day so your team can answer each one. It also keeps 1 sending number from pushing hundreds of texts in a minute.
WorkflowAdd actionSend SMS
Write the first text
Add Send SMS after the Drip. Keep the text short and leave out links. Ask 1 question the lead can answer in a word, then add opt-out language.
Setting What to enter Message Hi {{contact.first_name}}, this is [your name] at {{location.name}}. Are you still looking for help with [your service]? Reply STOP to opt out. You should now see: A Send SMS step with your question and an opt-out line
Why this matters: A 1-word question is easy to answer from a lock screen. Every reply opens a conversation your team can turn into a booked call.
WorkflowAdd actionWait
Add the follow-up steps
Add Wait set to For a set period of time, 2 days. Add Send email with a short note that asks the same question. Add another Wait of 3 days and a final Send SMS that asks whether to close their file. End the workflow there.
Setting What to enter Wait For a set period of time: 2 days Send email The same question, written for emailContacts with email DND are skipped Wait For a set period of time: 3 days Send SMS Should I close your file? Reply YES to keep it open. You should now see: 4 steps after the first text, ending with the final SMS
Why this matters: 1 message is easy to miss. A short sequence across text and email gives each lead 3 chances to answer without flooding them.
WorkflowSettings
Turn on Stop on response and a time window
Open the workflow's Settings tab. Turn on Stop on response, which ends the workflow for a contact who answers a message the workflow sent. Turn on Time window with Specific time and set your business hours. Drip batches that fall outside the window move to the next open slot.
Setting What to enter Stop on response OnEnds the sequence when the contact replies Time window Specific time, weekdays, your business hoursRestricts sends to the window Timezone Account timezoneWaits and the time window follow this zone You should now see: Stop on response on and a weekday time window in Settings
Why this matters: A lead who answers and then gets an automated follow-up feels ignored. Stop on response hands the conversation to your team the moment it starts.
AutomationWorkflowsCreate workflow
Catch replies and put them in the pipeline
Create a second workflow named Reactivation replies. Use the Customer replied trigger with a Has tag filter for reactivation-2026-11. Add Find opportunity set to Most recently created opportunity. On the Opportunity Found path, add Update opportunity and move the deal to Re-engaged. On the Opportunity Not Found path, add Create opportunity in that stage. End both paths with Send internal notification and Add task for the contact's owner.
Setting What to enter Trigger Customer replied Filter Has tag: reactivation-2026-11Limits the workflow to campaign contacts Find opportunity Most recently created opportunityOpens Found and Not Found paths Opportunity Found Update opportunity: stage Re-engaged Opportunity Not Found Create opportunity: stage Re-engaged You should now see: A reply workflow with Found and Not Found paths that both alert the owner
Why this matters: Find opportunity keeps 1 deal per lead. Without it, Create opportunity adds a second deal for every past customer who replies.
ContactsSmart ListsReactivationAdd tags
Publish both workflows, then tag the list
Switch both workflows to Publish. Open the Reactivation Smart List, tick the header checkbox, and click Select all. Choose Add tags and add reactivation-2026-11. The Drip releases the first batch inside your time window.
Setting What to enter Bulk action Add tags Tag reactivation-2026-11Must match the trigger filter exactly You should now see: Contacts entering the Reactivation campaign workflow in Enrollment history
Why this matters: Tagging last means every message and reply path is live before the first contact enters. Nobody on the list gets a half-built campaign.
What changes once this is set up
- Past leads hear from you in batches your team can keep up with
- Anyone who answers leaves the sequence and lands in your pipeline
- Each reply arrives with a task and an alert for the owner
- Contacts without marketing consent never receive the campaign
Common mistakes
Tagging the list before publishing the workflow
Fix: The Contact tag trigger fires only while the workflow is published. Remove the tag from anyone tagged early and add it again.
Treating opt-out replies as revived leads
Fix: Customer replied fires on STOP replies too. Add a Message body filter set to Does not contain STOP on the reply trigger, then test it with STOP and stop.
Using Create opportunity without Find opportunity
Fix: Create opportunity adds a new deal every time. Find opportunity first so past customers keep 1 deal.
Raising the batch size for contacts already queued
Fix: Drip changes apply only to contacts who reach the Drip afterward. Contacts already waiting keep their original schedule.
If it is not working
Nobody entered the workflow
Likely cause: The workflow was in Draft when the tag was added, or the tag spelling differs
What to check: Compare the trigger filter with the tag on a contact and check Enrollment history
Texts aren't going out
Likely cause: The contacts have SMS DND or the sending number isn't registered
What to check: Open a contact's conversation and read the error on the failed message
Batches stopped moving
Likely cause: The workflow was switched to Draft, which pauses contacts in the Drip
What to check: Republish the workflow and the Drip resumes where it stopped
A contact got the follow-up after replying
Likely cause: Stop on response is off
What to check: Turn it on in the workflow's Settings tab
FAQs
How many contacts should each batch hold?
Start with 50 an hour on 1 sending number. Raise it once your team keeps up with replies and the first batches deliver without failures. The Drip allows 1 to 10,000 per batch.
Can AI write and answer the reactivation texts?
Yes. Conversation AI campaigns let an AI agent send opening texts to a Smart List and keep talking when people reply. They run from the Contacts list once a Conversation AI agent is set up for outbound, which can require turning it on in Labs.
What should the first text say?
Your name, your business, 1 question about the problem they came to you with, and opt-out language. Save links and offers for the people who answer.
Does the Drip respect my business hours?
Yes, when the workflow's Time window is on. Batches that land outside the window move to the next open slot.
Do this next
How do I move stalled deals forward automatically in HighLevel?
The Stale opportunities workflow trigger catches any deal that sits in 1 stage too long without an update. Build a nudge workflow for each stage that matters, then a review workflow that moves deals still idle to a Review required stage with Update opportunity. The trigger starts from the opportunity itself, so Update opportunity acts on that exact deal with no Find opportunity step. Stalled deals get a prospect message and an owner task on time, and managers see every deal that needs a decision in 1 column.
How do I see which lead sources turn into booked calls in HighLevel?
HighLevel's Appointment report groups bookings by how they were made, with values such as Funnel and User, so it can't show which lead source produced a call. Tag every contact who books a sales call with a workflow, then compare 2 Lead source report widgets on your dashboard: 1 for all leads and 1 filtered to the booked tag. Divide the second count by the first for each source and you have a booking rate. Budget moves to the sources that fill the calendar, and leads that never book stop looking like wins.
Why isn't CloseBot replying to my leads?
CloseBot puts a warning on every contact its agent didn't answer, and the warning states the reason. A silent agent traces back to 1 of 5 causes: a broken source connection, a tag or channel filter that excludes the lead, the ai off tag on the contact, an empty response balance, or a message outside the source's reply window. Read the warning first. Fix that cause, then send a test text, and leads stop waiting on an agent that was never going to answer them.
People usually get here from
How do I create a sales pipeline in GoHighLevel
Creating structured sales pipelines in HighLevel organizes your deal progression and drives a higher close rate. By establishing custom stages, setting visual color indicators, and configuring reporting visibility, your team gains full clarity on every opportunity. Automated Won and Lost stages track final revenue outcomes without extra manual setup. Following this guide ensures no prospective deal stalls or drops out during customer negotiations.
How do I set up follow-up that reaches a new lead in under 5 minutes?
Automated lead follow-up is set up in HighLevel by creating a workflow triggered by the Contact Created event. When a new contact is added through a form submission, manual entry, API, or integration, the workflow immediately triggers actions such as sending an email or SMS, assigning tasks, or updating pipeline stages. You configure the trigger under Automations and apply tag or custom field filters to control which leads enter the sequence. This ensures new leads receive an immediate response without manual intervention.
How do I stop leads slipping through after they fill out a form?
Leads slip through when a form fill creates a contact and nothing else happens. Build 1 workflow on the Form submitted trigger that finds or creates the opportunity, and a second that assigns an owner and alerts them. When the owner doesn't reply within 15 minutes, a manager gets the alert. Every inquiry ends up with an owner and a deal, and a manager hears about any lead left untouched.
Was this guide helpful?
Ready to build this in HighLevel?
Every step in this guide runs inside HighLevel
Paid link
We may earn a commission when you sign up through this link, at no cost to you. Full disclosure.
Try this and Sell More
