How do I move stalled deals forward automatically in HighLevel?
By Ben McGary
Drafted with AI, then reviewed and approved by Ben McGary
Verified against HighLevel as of November 20, 2026
- Area
- Sales pipeline
- Time
- 14 min
- Difficulty
- Advanced
- Outcome
- higher close rate
- Updated
- November 20, 2026
Don't have a HighLevel account yet? Set one up and follow this guide in your own account.
Paid link
Before you start
- A sales pipeline with named stages
- An owner assigned to each open opportunity
- How many days a healthy deal sits in each stage
- In the new navigation from Labs, Automation shows as Automations
Steps
OpportunitiesPipelines
Set a stale window for each stage
List your stages and how long a healthy deal sits in each. HighLevel suggests 2 to 3 days for short sales cycles and 7 to 10 days for long ones. Write 2 numbers per stage: when to nudge and when the deal gets reviewed.
Setting What to enter Proposal sent Nudge at 3 days, review at 10 daysExample for a 30-day sales cycle Negotiation Nudge at 2 days, review at 7 days You should now see: A nudge day and a review day written next to every stage you want to watch
Why this matters: 1 number for every stage flags fast stages too late and slow stages too early. Reps learn to ignore alerts that fire at the wrong time.
AutomationWorkflowsCreate workflowAdd new triggerStale opportunities
Create the nudge workflow
Go to Automation, then Workflows, and click Create workflow. Start from scratch, click Add new trigger, search for stale, and choose Stale opportunities. Name the trigger after the stage and the window, for example Proposal sent stale 3 days.
You should now see: The Stale opportunities trigger panel, described as triggering opportunities idle longer than X days
Why this matters: 1 workflow per stage keeps the message matched to where the deal stalled. A prospect sitting on a proposal needs a different question than one who hasn't seen a demo.
Stale opportunitiesAdd filters
Filter the trigger to 1 stage of open deals
Click Add filters and set Duration in days, In pipeline, and the stage. Add Status set to Open so closed deals stay out. Use Doesn't have tag to skip deals a rep has paused, for example with a no-chase tag. Click Save trigger.
Setting What to enter Duration in days 3Your nudge number for this stage In pipeline Your sales pipeline Stage Proposal sent Status Open You should now see: The trigger card lists the duration, pipeline, stage, and status
Why this matters: Without the stage filter, every quiet deal in the pipeline gets the same message. The Status filter keeps won and lost deals out of the workflow.
WorkflowsAdd actionSend SMS
Nudge the prospect
Add a Send SMS or Send email action written for this stage. For Proposal sent, ask 1 direct question the prospect can answer in a few words. Skip just checking in, which gives the prospect nothing to answer.
Setting What to enter Example SMS Hi {{contact.first_name}}, does a start date of the 1st still work, or should we plan for the month after? You should now see: A message action under the trigger
Why this matters: A short question restarts the conversation. Any reply gives the rep a reason to call today.
WorkflowsAdd actionAdd task
Give the owner a task and publish
Add an Add task action due today, assigned to the deal's owner, with the stage and idle days in the title. Add Send internal notification as well if your reps work from their phones. Switch the toggle from Draft to Publish.
You should now see: Add task after the message and the workflow switched to Publish
Why this matters: The task puts the stalled deal on the rep's list for today. A deal that only lives on the pipeline board gets passed over.
OpportunitiesPipelinesEdit pipelineAdd stage
Add a Review required stage
Edit your sales pipeline and add a stage named Review required after your last active stage. Turn off its funnel chart icon so parked deals don't distort conversion between real stages.
You should now see: Review required as the last stage on the pipeline board
Why this matters: Parked deals leave the active columns, so the board shows only deals reps can work. Managers see every deal that needs a decision in 1 place.
AutomationWorkflowsCreate workflowStale opportunities
Build the review workflow
Create a second workflow with the Stale opportunities trigger. Use the same pipeline, stage, and Status filters, with Duration in days set to your review number. Add Send internal notification to the sales manager with the deal name and the owner.
Setting What to enter Duration in days 10Your review number for this stage Stage Proposal sent Status Open You should now see: A second workflow whose trigger fires at the review window
Why this matters: The nudge workflow gives the rep the first shot. The review workflow brings in a manager only when that shot didn't move the deal.
WorkflowsAdd actionUpdate opportunity
Move the deal with Update opportunity
Add Update opportunity, click Add field, choose the pipeline stage, and set it to Review required. The workflow starts from the opportunity, so the action updates that same deal and needs no Find opportunity step. Use Update opportunity, never the deprecated Create/update opportunity action. Switch the workflow to Publish.
Setting What to enter Pipeline stage Review required Allow Opportunity to Move to Any Previous Stage OffReview required sits last, so the move goes forward You should now see: Update opportunity set to Review required and the workflow switched to Publish
Why this matters: The move pulls the deal out of the active columns and restarts its stale timer. The board then shows only what can close this month.
What changes once this is set up
- Deals that go quiet get a prospect message and an owner task on the day they go stale
- Deals still idle at the review window move to Review required with a manager alert
- The active columns on the board hold only deals that are moving
- Any update restarts the stale timer, so a deal that stalls again gets caught again
Common mistakes
Adding Find opportunity after an opportunity trigger
Fix: The Stale opportunities trigger already passes the deal into the workflow. Find opportunity searches the contact's opportunities and can return a different deal when the contact has more than 1.
Using the Create/update opportunity action
Fix: It is deprecated and still shows in the action list. Use Update opportunity to change an existing deal.
Expecting the trigger to catch deals that were already stuck
Fix: The stale clock starts when you add the trigger. Review the board by hand once on the day you publish.
If it is not working
The nudge workflow never fires
Likely cause: Someone updates the deals before the duration runs out, or the stage filter names a different stage
What to check: Open Enrollment history, then check the trigger's pipeline, stage, and Duration in days
The deal didn't move to Review required
Likely cause: Review required sits before the deal's current stage while Allow Opportunity to Move to Any Previous Stage is off
What to check: Move Review required to the end of the pipeline or turn the toggle on
Publish is blocked
Likely cause: A step has an unresolved configuration error
What to check: Open the error list in the builder, fix each flagged step, then switch to Publish
FAQs
What resets the stale timer?
HighLevel resets it when the opportunity moves to a new stage or is updated. Its help article doesn't name notes or logged emails as resets, so test with a real deal before you rely on them.
Can 1 workflow watch every stage?
A workflow can hold several Stale opportunities triggers, 1 per stage, but the actions after them are shared. Separate workflows let each message fit its stage.
Should the review workflow mark deals Lost?
Move them to Review required first. A manager can mark a deal Lost after a call, which keeps lost reasons accurate for reporting.
Does this catch deals that were stale before I published?
No. The stale clock starts when the trigger is added, so older stuck deals need 1 manual review.
Do this next
How do I see which lead sources turn into booked calls in HighLevel?
HighLevel's Appointment report groups bookings by how they were made, with values such as Funnel and User, so it can't show which lead source produced a call. Tag every contact who books a sales call with a workflow, then compare 2 Lead source report widgets on your dashboard: 1 for all leads and 1 filtered to the booked tag. Divide the second count by the first for each source and you have a booking rate. Budget moves to the sources that fill the calendar, and leads that never book stop looking like wins.
Why don't my HighLevel reports match my real numbers?
HighLevel reports drift from your own count when widgets count by different dates, mix pipelines, count opportunities where you count people, use a different attribution model, or lose the source on incoming leads. On the default dashboard, every opportunity widget counts by Status change, so a deal created in March and lost in November lands in November. Work through the checks below in order and note the number after each one. Once every widget shares 1 pipeline, 1 date property, and 1 attribution model, any gap left points to specific records you can fix.
How to set up a conversation AI bot in HighLevel
Setting up a Conversation AI bot in HighLevel allows you to automate prospect conversations across SMS, Email, social channels, and live chat. You can build your bot using Guided Form Setup, Prompt Based Bot, or Flow Based Builder depending on your workflow complexity. Configuring bot training, actions, and response modes ensures immediate lead qualification and appointment scheduling, directly increasing your pipeline close rate.
People usually get here from
How do I create a sales pipeline in GoHighLevel
Creating structured sales pipelines in HighLevel organizes your deal progression and drives a higher close rate. By establishing custom stages, setting visual color indicators, and configuring reporting visibility, your team gains full clarity on every opportunity. Automated Won and Lost stages track final revenue outcomes without extra manual setup. Following this guide ensures no prospective deal stalls or drops out during customer negotiations.
How do I set up follow-up that reaches a new lead in under 5 minutes?
Automated lead follow-up is set up in HighLevel by creating a workflow triggered by the Contact Created event. When a new contact is added through a form submission, manual entry, API, or integration, the workflow immediately triggers actions such as sending an email or SMS, assigning tasks, or updating pipeline stages. You configure the trigger under Automations and apply tag or custom field filters to control which leads enter the sequence. This ensures new leads receive an immediate response without manual intervention.
How do I stop leads slipping through after they fill out a form?
To stop leads slipping through after form submission, configure automated contact profile creation, immediate SMS auto-responders, and unified conversation routing across your account. Authenticate dedicated email sending domains to ensure notification emails avoid spam folders. Utilize location IDs and API endpoints correctly to guarantee form data routes into the right account instantly.
Was this guide helpful?
Ready to build this in HighLevel?
Every step in this guide runs inside HighLevel
Paid link
We may earn a commission when you sign up through this link, at no cost to you. Full disclosure.
Try this and Sell More
