Why isn't CloseBot replying to my leads?
By Ben McGary
Drafted with AI, then reviewed and approved by Ben McGary
Verified against CloseBot help docs as of November 20, 2026
- Area
- AI
- Time
- 12 min
- Difficulty
- Working
- Outcome
- faster follow-up
- Updated
- November 20, 2026
Don't have a CloseBot account yet? Set one up and connect it to your HighLevel sub-account.
Paid link
Before you start
- Owner access to the CloseBot account
- Admin access to the HighLevel sub-account connected as the source
- A phone you can text the business number from
- The name of the job flow that should answer
Steps
CloseBotContact that got no reply
Read the warning on the unanswered contact
CloseBot adds a warning to any contact or conversation its agent didn't answer, and the warning explains why. Open the contact that went quiet and read it before you change a setting. The reason points to 1 of the steps below.
You should now see: A warning on the contact that names the reason the agent stayed silent
Why this matters: Every blind change costs a test message and a lead's patience. The warning tells you which setting to touch first.
CloseBotSourcesAdd Source
Confirm the message reached CloseBot
A message that never shows in your CloseBot message queue never reached the agent. That happens when the source is missing from your list of sources, when it's installed on a different CloseBot account, or when the connection to HighLevel dropped. Reconnect the source to fix it. If the source holds a wallet balance, re-add it through Add Source instead of disconnecting it.
Setting What to enter Message missing from the queue Re-add the source through Add SourceKeeps job flow attachments, variables, and the wallet balance Disconnect and reconnect Avoid on sources with a wallet balanceDisconnecting clears the balance You should now see: Your test message appears in the CloseBot message queue
Why this matters: A message CloseBot never received can't be fixed with filters or prompts. If the connection keeps dropping, CloseBot's docs send you to the source's support team, because the break sits on that side.
CloseBotJob flow builderSources tab
Check the channel and tag filters
Source filters decide which contacts the agent answers, and you set them in CloseBot rather than in HighLevel. Open the job flow, click the Sources tab on the right side of the builder, and select the source. Channel filters limit replies to the channels you pick. Tag filters list tags a contact must have and tags it must not have, and a contact has to pass both.
Setting What to enter Channel filter Every channel your leads message you onThe agent answers only the channels selected Required tags Leave empty for inbound texts and DMs Excluded tags ai offAdded to every source filter by default You should now see: A source filter with every channel your leads use and no tag new leads lack
Why this matters: An agent set to SMS only stays silent on Facebook and live chat. Leads on those channels see no reply and move on to the next business.
CloseBotJob flow builderTag filters
Swap a required tag for a disabling tag
CloseBot shows the error Tags Did Not Line Up With An Agent when a new lead lacks a tag the agent requires. Leads who message first from Facebook, Instagram, or a cold text arrive before your CRM tags them, so an agent that requires AI ON never answers them. Remove the required tag and keep ai off as the excluded tag. The agent then answers everyone except contacts you switched off.
You should now see: A test text from an untagged number gets an agent reply
Why this matters: A lead who texts first is asking for an answer now. A required tag makes the agent skip exactly those people.
HighLevelContactsOpen the contact
Remove the ai off tag from the contact
The ai off tag keeps a contact out of every job flow. Remove it from the contact in HighLevel and the agent can answer again. Then check Bot Auto Shutoff on manual message in the source's General settings in CloseBot. When it's on, any manual reply from your team adds ai off, so 1 quick human text turns the agent off for that lead.
Setting What to enter ai off tag Remove it from the contactHubSpot uses the cb_ai_off field instead Bot Auto Shutoff on manual message On only if your team takes over by handAdds ai off after any manual reply You should now see: The contact has no ai off tag and a test text gets an agent reply
Why this matters: A rep who answers once by hand switches the agent off for that lead. Unless the team knows it, the lead waits on a person who assumes the agent still has the conversation.
CloseBotSourcesRebill
Check the response balance
The agent stops replying when the account runs out of responses or a source wallet goes negative. The Rebill section of the source shows the source wallet and recent usage charges. Top up before you test again, or the next test fails for the same reason.
You should now see: A positive wallet balance on the source
Why this matters: A balance problem looks exactly like a broken agent. Check it before you rebuild a single job flow.
CloseBotSourcesAvailability
Check the reply windows
Reply Restrictions set the time windows when the agent may answer and which channels follow them. A message that lands outside the window gets no reply from the agent. Follow-Up Restrictions set the windows for follow-up messages, which stay on the conversation's channel. Widen the reply window, or put a person on the hours it leaves out.
Setting What to enter Reply Restrictions The hours you want the agent answeringApplies to the channels you select Follow-Up Restrictions The hours follow-ups may sendNo channel selection needed You should now see: A reply window that covers the hour your test lead texted
Why this matters: A window that closes at 5 PM leaves every evening text unanswered. Those leads land with whichever competitor answers first.
CloseBotPersona SettingsResponse Delay
Send a test and clear duplicate replies
Text the business number from your own phone and watch the conversation. 2 different replies to 1 message mean CloseBot Classic and V2 both run, so remove duplicate CloseBot apps from the HighLevel marketplace and turn off Classic workflows. A reply to every line of a quick burst means the persona has no response delay, so add 1 in Persona Settings.
Setting What to enter Response Delay A short delayLets the agent wait while a contact is still typing You should now see: 1 agent reply to your test message
Why this matters: Double replies read like spam and make the agent look broken. 1 clean answer keeps the conversation moving toward a booking.
What changes once this is set up
- New leads get an answer before your CRM tags them
- Your team knows a manual reply switches the agent off
- Each source answers on every channel your leads use
- 1 test text proves a lead's message reaches the agent and gets an answer
Common mistakes
Disconnecting a source to reset it
Fix: Re-add it through Add Source. Disconnecting a source clears its wallet balance.
Requiring an AI ON tag on every job flow
Fix: Require no tag and exclude ai off. Leads who message first have no tags when CloseBot checks them.
Answering a lead by hand and expecting the agent to pick back up
Fix: With Bot Auto Shutoff on manual message turned on, your reply adds ai off. Remove the tag when you want the agent back.
If it is not working
The agent sends 2 different replies
Likely cause: CloseBot Classic and V2 are both active
What to check: Look for duplicate CloseBot apps in the HighLevel marketplace and leftover Classic job flows or personas
The agent sends the same reply twice
Likely cause: A temporary sending failure made CloseBot resend it
What to check: Check the conversation log and contact CloseBot support if both copies were delivered
CloseBot replied but the lead never got the text
Likely cause: HighLevel couldn't deliver the SMS
What to check: Open the conversation in HighLevel and look for a failed status on the outbound message
Replies stopped for every contact at once
Likely cause: The response balance ran out or the selected AI platform is down
What to check: Read the warning on a recent contact and check the source wallet in Rebill
FAQs
Does the Stop Responding action turn the agent off for good?
No. It stops replies at that point in the job flow while the agent keeps listening. Conversational Rescheduling and Custom Scenarios can still bring the contact back in. The ai off tag is the lasting switch.
How do I turn the agent back on for 1 contact?
Remove the ai off tag from the contact in HighLevel. In HubSpot, change the cb_ai_off field.
Can the agent answer some channels and not others?
Yes. Select channels in the source's channel filter. The agent answers only the channels you select.
Why did a brand-new lead get no reply?
Check the job flow for a required tag. Leads who message first have none, and CloseBot shows Tags Did Not Line Up With An Agent. Require no tag and exclude ai off instead.
Do this next
How do I see which lead sources turn into booked calls in HighLevel?
HighLevel's Appointment report groups bookings by how they were made, with values such as Funnel and User, so it can't show which lead source produced a call. Tag every contact who books a sales call with a workflow, then compare 2 Lead source report widgets on your dashboard: 1 for all leads and 1 filtered to the booked tag. Divide the second count by the first for each source and you have a booking rate. Budget moves to the sources that fill the calendar, and leads that never book stop looking like wins.
How do I stop double-booking and cut no-shows in HighLevel?
Double-booking stops when HighLevel checks every calendar your team works from, so connect each person's calendars as conflict calendars and set buffers and booking limits. Cut no-shows with reminders that ask for a reply: text 24 hours ahead and mark the appointment Confirmed when the contact answers YES. Anyone marked No-show gets a rebooking link the same day. Your team stops losing hours to overlapping calls and empty slots.
How do I run a reactivation campaign in HighLevel?
Build a Smart List of past leads who agreed to marketing messages, then tag them in bulk to start a reactivation workflow. The Drip action releases contacts in small batches, and Stop on response ends the sequence the moment someone answers. A second workflow puts each reply into your pipeline with a task for the owner. Old leads turn into conversations without 1 blast going out to your whole database.
People usually get here from
How do I set up CloseBot to book appointments by text?
CloseBot books appointments by text through an Agent Node with its HighLevel calendar tools switched on: Check Appointment Availability, Book Appointments, and Cancel/Reschedule Appointment. Connect your HighLevel sub-account as a source, build a job flow around 1 Agent Node, name the calendar to book in its instructions, and limit the source to SMS with tag rules. CloseBot reads availability from your HighLevel calendar, so the times it offers match your real openings. Qualified leads pick a time and get booked inside the same text thread.
How to set up a conversation AI bot in HighLevel
Setting up a Conversation AI bot in HighLevel allows you to automate prospect conversations across SMS, Email, social channels, and live chat. You can build your bot using Guided Form Setup, Prompt Based Bot, or Flow Based Builder depending on your workflow complexity. Configuring bot training, actions, and response modes ensures immediate lead qualification and appointment scheduling, directly increasing your pipeline close rate.
How do I set up missed call text back in GoHighLevel
Missed Call Text Back automatically sends an SMS response to inbound callers when their call goes unanswered. You configure this feature inside your sub-account Settings under the Phone System tab. Enabling the feature allows you to customize your message text, set ring timeout thresholds, and preview test messages before going live.
Was this guide helpful?
Ready to let CloseBot book your calls?
Every step in this guide runs inside CloseBot and HighLevel
Paid link
We may earn a commission when you sign up through this link, at no cost to you. Full disclosure.
Try this and Sell More
