How do I see which lead sources turn into booked calls in HighLevel?
By Ben McGary
Drafted with AI, then reviewed and approved by Ben McGary
Verified against HighLevel as of November 20, 2026
- Area
- Reporting
- Time
- 12 min
- Difficulty
- Working
- Outcome
- sales visibility
- Updated
- November 20, 2026
Don't have a HighLevel account yet? Set one up and follow this guide in your own account.
Paid link
Before you start
- Admin access to the sub-account's Dashboard and Automation
- A sales pipeline where every new lead gets an opportunity
- The calendar your sales calls are booked on
- In the new navigation from Labs, Automation shows as Automations
Steps
OpportunitiesPipelinesOpen a recent opportunity
Check that your opportunities carry a source
The Lead source report groups opportunities by their Opportunity Source. Open 3 recent opportunities in your sales pipeline and look at the source on each. An opportunity without a source lands in an N/A row on the report. If a workflow creates your opportunities, open it and fill in Opportunity Source on the Create opportunity action with a value such as {{contact.source}}.
Setting What to enter Opportunity Source {{contact.source}}Left blank, the report shows N/A You should now see: Each recent opportunity shows a source such as a form name or a campaign
Why this matters: A booking rate by source only works when every lead carries a source from the day it arrives. Blank sources pile into N/A and make your best channel look smaller than it is.
AutomationWorkflowsCreate workflow
Create the booked-call workflow
Go to Automation, then Workflows, and click Create workflow. Start from scratch and name it Tag booked sales calls. This workflow has 1 job: mark every contact who books a sales call so the dashboard can count them.
You should now see: An empty workflow canvas with Add new trigger at the top
Why this matters: A tag stays on the contact after the appointment moves or gets cancelled. That makes it a stable marker for reporting while appointment statuses keep changing.
WorkflowsAdd new triggerCustomer booked appointment
Trigger on bookings in your sales calendar
Click Add new trigger, search for appointment, and pick Customer booked appointment. Add a filter for the calendar your sales calls use, then click Save trigger.
Setting What to enter Trigger Customer booked appointment Calendar filter Your sales call calendarWithout it, every calendar in the sub-account counts You should now see: The trigger card names Customer booked appointment and your sales calendar
Why this matters: Support calls and onboarding sessions inflate the booking rate when they share the count. Ad spend then follows numbers that were never sales calls.
WorkflowsAdd actionAdd contact tag
Tag the contact and publish
Click the plus under the trigger, search for tag, and choose Add contact tag. Create a tag named call-booked and save the action. Switch the toggle at the top right from Draft to Publish. Publishing stops while any step has a configuration error, so clear flagged steps first.
Setting What to enter Tag call-bookedUse this exact spelling everywhere You should now see: Add contact tag under the trigger and the workflow switched to Publish
Why this matters: Only bookings made after you publish get the tag. Start your dashboard date range on the day you publish so both widgets cover the same leads.
DashboardEdit dashboardSearch widgetsLead source report
Add the Lead source report
Open Dashboard and click Edit dashboard. In the widget panel, search for source and add Lead source report from the General category. In the widget's pipeline dropdown, pick your sales pipeline in place of All pipelines. Edit mode saves as you go, so place the widget where you want it to stay.
Setting What to enter Widget Lead source reportListed under General Pipeline Your sales pipeline You should now see: A table with Source, Total Leads, Open, Won, Lost, and Abandoned columns
Why this matters: Each row is a source and Total Leads counts the opportunities it produced. This widget gives you the bottom half of every booking rate.
Widget menuEditAdvanced settingsDate property
Count leads by the date they arrived
Open the widget menu, click Edit, and expand Advanced settings. Change Date property from Status change to Created on. Rename the widget All leads by source and click Save.
Setting What to enter Date property Created onStatus change counts a deal on the date its status last moved Title All leads by source You should now see: The subtitle under the widget title reads Created on
Why this matters: Under Status change, a lead from March shows up in November the day someone marks it Lost. Created on keeps each lead in the period it arrived, which is what a booking rate needs.
Widget menuDuplicateEditConditionsAdd filterTags
Duplicate the widget and filter it to booked calls
Open the widget menu again and click Duplicate. Edit the copy, open Conditions, click Add filter, and choose Tags. Set it to call-booked, rename the copy Booked calls by source, and click Save.
Setting What to enter Filter Tags Value call-booked Title Booked calls by source You should now see: 2 Lead source report widgets, the second with smaller counts
Why this matters: Both widgets share the pipeline, the dates, and the date property, and differ only by the tag. Every gap between them is a lead who never booked.
DashboardDate range
Read the booking rate for each source
Set the dashboard date range to start on the day you published the workflow and run at least 30 days. For each source, divide Total Leads in Booked calls by source by Total Leads in All leads by source. A source with 40 leads and 10 booked calls books at 25%.
You should now see: A booking rate you can compare across every source in the pipeline
Why this matters: Lead volume and booked calls rank sources differently. Moving budget toward the higher booking rate fills the calendar without raising spend.
What changes once this is set up
- Every sales booking tags the contact without anyone touching it
- Leads and booked calls by source sit side by side for the same pipeline and dates
- Leads without a source show up as N/A, so tracking gaps are visible
- Budget decisions run on booking rate per source
Common mistakes
Reading the Appointment report's Source chart as lead source
Fix: That chart shows how the appointment was booked, with values such as Funnel and User. Use the Lead source report filtered by the booked tag for lead source.
Leaving Date property on Status change
Fix: Status change counts an old lead in the month it was won or lost. Set Date property to Created on in both widgets.
Picking the sales pipeline in only 1 of the 2 widgets
Fix: Pick the same pipeline in both. A mismatch compares leads from 1 pipeline against bookings from all of them.
If it is not working
Booked calls by source shows no data
Likely cause: No contact has the call-booked tag yet, or the workflow is still in Draft
What to check: Open the workflow's Enrollment history and confirm a recent booking enrolled and got the tag
Most bookings sit in an N/A row
Likely cause: Those opportunities were created without an Opportunity Source
What to check: Open the workflow or form that creates opportunities and fill in Opportunity Source
Booked calls exceed total leads for a source
Likely cause: The 2 widgets use different pipelines or different date properties
What to check: Match the pipeline and the Date property in both widgets
FAQs
Why doesn't the Appointment report show lead source?
The Appointment report groups bookings by channel and by booking source, which describe how the appointment was made. A Facebook lead who books through your website calendar shows up under Funnel.
Does the Lead source report count contacts or opportunities?
Opportunities. A contact with 2 opportunities in the pipeline counts twice, and a contact with no opportunity doesn't count. Give each new lead 1 opportunity in the sales pipeline for clean numbers.
Can I see booked calls by ad channel instead of form name?
Yes. In the widget's Conditions, add an Attribution filter, choose First attribution, and filter on Session source or a UTM field such as UTM campaign. First attribution never changes, so it credits the channel that brought the lead in.
Will a rescheduled call count twice?
No. The workflow adds the same tag again, which changes nothing, so the Booked calls widget still counts that lead once.
Do this next
Why don't my HighLevel reports match my real numbers?
HighLevel reports drift from your own count when widgets count by different dates, mix pipelines, count opportunities where you count people, use a different attribution model, or lose the source on incoming leads. On the default dashboard, every opportunity widget counts by Status change, so a deal created in March and lost in November lands in November. Work through the checks below in order and note the number after each one. Once every widget shares 1 pipeline, 1 date property, and 1 attribution model, any gap left points to specific records you can fix.
How do I move stalled deals forward automatically in HighLevel?
The Stale opportunities workflow trigger catches any deal that sits in 1 stage too long without an update. Build a nudge workflow for each stage that matters, then a review workflow that moves deals still idle to a Review required stage with Update opportunity. The trigger starts from the opportunity itself, so Update opportunity acts on that exact deal with no Find opportunity step. Stalled deals get a prospect message and an owner task on time, and managers see every deal that needs a decision in 1 column.
How do I create a sales pipeline in GoHighLevel
Creating structured sales pipelines in HighLevel organizes your deal progression and drives a higher close rate. By establishing custom stages, setting visual color indicators, and configuring reporting visibility, your team gains full clarity on every opportunity. Automated Won and Lost stages track final revenue outcomes without extra manual setup. Following this guide ensures no prospective deal stalls or drops out during customer negotiations.
People usually get here from
How to set up a booking calendar in HighLevel
Setting up a HighLevel Personal Booking Calendar establishes an automated scheduling system for 1-on-1 meetings. You configure host availability, integrate external personal calendars, and connect video conferencing tools within your workspace settings. Activating the pre-built Appointment Confirmation + Reminder workflow automates notification delivery to reduce no-shows. Sharing your public calendar link allows prospective clients to self-schedule friction-free.
How do I stop leads slipping through after they fill out a form?
To stop leads slipping through after form submission, configure automated contact profile creation, immediate SMS auto-responders, and unified conversation routing across your account. Authenticate dedicated email sending domains to ensure notification emails avoid spam folders. Utilize location IDs and API endpoints correctly to guarantee form data routes into the right account instantly.
How do I set up follow-up that reaches a new lead in under 5 minutes?
Automated lead follow-up is set up in HighLevel by creating a workflow triggered by the Contact Created event. When a new contact is added through a form submission, manual entry, API, or integration, the workflow immediately triggers actions such as sending an email or SMS, assigning tasks, or updating pipeline stages. You configure the trigger under Automations and apply tag or custom field filters to control which leads enter the sequence. This ensures new leads receive an immediate response without manual intervention.
Was this guide helpful?
Ready to build this in HighLevel?
Every step in this guide runs inside HighLevel
Paid link
We may earn a commission when you sign up through this link, at no cost to you. Full disclosure.
Try this and Sell More
